Belkin F5D5231-4 - Manual (Page 18)

CONNECTING AND CONFIGURING YOUR CABLE/DSL GATEWAY ROUTER
Step 5: Adding Other Computers to your Network Using the Easy Install Wizard
If you have other computers in your home that are already equipped with a
network adapter, you can use the Easy Install Wizard to set up those computers to
connect to your Router. If you are adding a Belkin network adapter your other
computers, install the adapter per the instructions for the adapter. When the
installation of the adapter is finished, your computer will be set up to connect to
the Router. You do not need to use the Easy Install Wizard to set up the computer.
For Computers Already Equipped with a Network Adapter
5.1 Connect an Ethernet cable between the computer you want to add to the
network and the Router.
5.2 Insert the CD into your CD-ROM drive. The Easy Installation Wizard screen will
automatically pop-up on your screen within 15 seconds. If it does not, select
your CD-ROM drive and double-click on the file named “Setup” on the CD-ROM.
5.3 Click “Add computers”.
5.4 The Wizard will make the changes needed to add your computer to the
network. When finished, it will prompt to reboot your computer. Click “Yes”.
5.5 When your computer reboots, your computer will be connected to the
network. To begin surfing the Internet, open your browser and go to your
favorite web page.
You are finished adding the computer to the network. To add more computers,
repeat this process on each computer you wish to add.
16