Xenyx 1222fx – Behringer XENYX 1222FX User Manual

Page 13

XENYX 1222FX

Fig. 4.1: 1/4" TS footswitch connector

4.2.1 Audio connections

Please use commercial RCA cables to wire the 2-track inputs

and outputs.

You can, of course, also connect unbalanced devices to the

balanced input/outputs. Use either mono plugs, or ensure that

ring and sleeve are bridged inside the stereo plug (or pins 1 & 3

in the case of XLR connectors).

Caution! You must never use unbalanced XLR

connectors (pins 1 and 3 connected) on the MIC

inputs if you intend to use the phantom power

supply.