Beko 15LB250MID - Manual (Page 18)

16
MENU
PROGRAM TABLE
00
01 Channel
02 Channel
03
04
05
06
07
08
09 10
11
12
13
14
SKIP
MOVE NAME
DELETE
SELECT BACK
6.4.2.2-If you do not know the
channel number
Press the MENU button. Move to
the SETUP menu by pressing the
down movement button in the Main
Menu and confirm your selection with
the OK button. The Setup menu is
displayed. Select the system in which
you would like to make the search
from the SYSTEM tab and move
to the CHANNEL tab by pressing
the down movement button. Press
OK on your remote control and
select “S” for cable channels and
“C” for channels received via the
aerial. Select SEARCH tab using
the Up/Down movement buttons,
and scan the channels in ascending
order with Right movement button
and in descending order with Left
movement button. If the channel that
is found is of your liking, select the STORE
tab. Then store it in the memory pressing
the right or left movement buttons. Repeat
the same procedure for other channels by
selecting the program number of your choice
from the PROGRAM NO tab. If the channel
you found is not of the desired quality and
requires Fine Tuning or if you would like to
rename the channel, refer to the relevant
sections.
6.4.3-Fine Tuning
If the channel you found is not of the
desired quality, then select the FINE
TUNE tab by pressing the Down
movement button in the Setup menu.
Using the Left/Right movement
buttons on your remote control,
adjust the broadcast displayed on the
screen to your desired quality. Under
normal circumstances, you will not require
to use the Fine Tune function. The AFC
values of your television will automatically
adjust and lock themselves to the channel.
However, you might need it in case the
television transmitters do not operate
according to the standards. To store in the
memory the settings you have made, select
the Store tab and press the Right or Left
movement button.
6.4.4-Program table
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program table menu will be displayed.
6.4.4.1-Switching the locations of
the stored channels
Select the program you would like
to relocate by pressing the Up/
Down or Left/Right movement
buttons. “Press the “ GREEN”
button. The color of the channel
name will change. Move to the other
program you would like to relocate
by pressing the Up/Down or Right/
Left movement buttons. Finish the
relocation process by pressing the
“ RED” colored confirmation button.
The channel in the first program
number you selected has been
moved to your second selected program
number and the channels between both
program numbers have been shifted to the
initially selected program number. After
setting is complete, press the MENU button
to exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like
to delete by pressing the Up/Down
or Right/Left movement buttons
while you are in the program table.
“Press the “ BLUE” button. You can
perform the deletion process by
pressing the “ RED” confirmation button or
abort the process by pressing the “ GREEN”
button. “Once you press the “ RED” button,
the selected program is deleted and the
following channels are transferred to
previous program number. After setting is
complete, press the MENU button to exit
the menu.