Brother TZTAPE PT-300 User Manual

Page 42

-40-

When “- ”, “# ”, “## ” or “### ” is set, press

feed the tape after the label is printed and before the tape is cut. If the
tape is not fed before being cut, some of the printed characters may be
cut off. (See the illustrations below.)

Example

● When “####” is set, the tape is automatically fed 1”(24mm) after the

label is printed. If the tape is cut without being fed, a label like that
shown in the illustration below is produced.

● When “- ” is set, the tape is not automatically fed after the label is

printed. If

is pressed to feed the tape and the tape

is cut, a label like that shown in the illustration below is produced.

● When “# ” is set, 4mm of the tape is automatically fed after the label is

printed. If

is pressed to feed the tape and the tape

is cut, a label like that shown in the illustration below is produced.
Please cut the tape on the “:” mark with scissors.

Note:

CODE

SPACE

FEED

1”

(24mm)

1”

(24mm)

CODE

SPACE

FEED

1”

(24mm)

CODE

SPACE

FEED

1/6”

(4mm)

1”

(24mm)

1/6”

(4mm)