Black Box LR5100A-T User Manual

Page 51

Applications

The DLCI number defined here is the Data Link Connection Identifier

value provided by your frame relay service provider. This value must be

set if auto-learning is disabled.

Each Remote Site PVC must be defined to exist on one of the two physical WAN links

available on this router.

Primary Link

Location: Main

Configuration

WAN Set up

Remote Site Set-up

Edit Remote Site

Connection Set-up

Primary Link

The Primary Link value defines to which of the two physical WAN links

that this PVC will be assigned. This value must be set.

Two other values must be set before the remote site profiles are fully configured, the CIR

and EIR. The Committed Information Rate (CIR) option specifies the data rate that the

Frame Relay service has guaranteed to provide. The Excess Information Rate (EIR)

option specifies the data rate that the Frame Relay service indicates may be available for

this PVC.

CIR

Location: Main

Configuration

WAN Set up

Remote Site Set-up

Edit Remote Site

Connection Set-up

CIR

The CIR value specifies the guaranteed data rate for this PVC. This

value must be set to the same as the value provided by the Frame Relay

network provider. The value of 0 indicates that there is no commitment

on the data rate.

Configuration:

When changing the CIR option for this PVC, the PVC must be disabled and

Note

then enabled before the new value will take effect.

This manual is related to the following products: