Black Box LR5100A-T - Manual (Page 31)

Applications
23
The following steps must be performed on the router connected to LAN #2.
IPX Routing Disabled
Location: Main
Ä
Configuration
Ä
IPX Routing Set-up
Ä
IPX Routing
Disabling IPX routing allows the IPX frame types to be modified.
Configuration: IPX Routing does not need to be disabled in order to change the defined
Note network numbers on a PPP router.
IPX Frame Types
Location: Main
Ä
Configuration
Ä
LAN Set-up
Ä
LAN IPX Set-up
Ä
Ethernet-II Frames
Ä
RAW 802.3 Frames
Ä
IEEE 802.2 Frames
Ä
802.2 SNAP Frames
Define the IPX network number for the appropriate frame type. Note
that IPX network numbers must be unique. If more than one frame
type is to be used, each frame type must have a unique IPX network
number. There must be no duplicate IPX network numbers within your
entire IPX routed network they must all be unique. The IPX network
numbers may be any value from 0 to FFFFFFFF HEX.
IPX Routing Enabled
Location: Main
Ä
Configuration
Ä
IPX Routing Set-up
Ä
IPX Routing
IPX routing must be re-enabled to allow the router to operate as an
IPX router with the newly defined IPX network numbers.
All connected router IPX routers must have IPX routing enabled for
IPX routing to take place between the LANs. When one of the routers
on a network has IPX routing disabled, all of the router IPX routers will
become bridges only for IPX frames.
7
7
7