Connecting the appliance, Ventilation – Neff K3670X0GB User Manual
Page 6

6
Note ambient
temperature and
ventilation
The climatic class can be found on the
rating plate. It specifies the ambient
temperatures at which the appliance may
be operated.
Climatic category
Permitted ambient
temperature
SN
+10
°C to 32 °C
N
+16
°C to 32 °C
ST
+16
°C to 38 °C
T
+16
°C to 43 °C
Ventilation
The air at the rear of the appliance heats
up. This heated air must be able to
escape. If the air flow is obstructed, the
refrigerating unit must work harder. This
increases the power consumption.
Therefore, NEVER cover or block the
ventilation slots!
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance starts up.
During transportation the oil in the
compressor may have flowed into the
refrigeration system.
Before switching on the appliance for
the first time, clean the interior of the
appliance (see chapter Cleaning).
The socket should be freely accessible.
Connect the appliance only to
220ć240 V/50 Hz alternating current via
a correctly installed earthed socket.
The socket must be fused with a 10 A
to 16 A fuse.
If the appliance is to be operated in
a nonĆEuropean country, check on
the rating plate whether the indicated
voltage and current type correspond
to the values of your mains supply.
The rating plate is situated in the bottom
leftĆhand side of the appliance. The power
cord may be replaced by a technician
only.
!
Warning
Never connect the appliance to electronic
energy saver plugs or to power inverters
which convert the direct current to 230 V
alternating current (e.g. solar equipment,
power supplies on ships).
en