Saving another setting, Notes, Starting the memory function – Neff C54L70N3GB User Manual
Page 9: Press the main switch, Press and hold the l button for a few seconds, Select "m1" or "m2" using the programme selector, Press the … button, Note, The cooking time has elapsed, Pausing operation
9
■
how to save the memory
■
how to start the memory
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Notes
■
The programmes which have been set remain stored even if
there is a power cut.
■
You can also store settings for the grill, MicroCombi mode
and the series of operations.
Starting the memory function
You can start cooking at any time using the settings saved for
your dish.
1. Press the main switch.
The
~
symbol lights up. Your appliance is ready for use.
2. Press and hold the
l
button for a few seconds.
3. Select "M1" or "M2" using the programme selector.
4. Press the
…
button.
The memory function starts. The
x
cooking time counts down
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: Saved settings are retained even after a power cut.
The cooking time has elapsed
A signal sounds. The memory function has finished. You can
stop the audible signal early by pressing the
ON
clock function
button. Press the main switch to switch off the appliance, or
make new settings.
Pausing operation
Press the
…
button or open the appliance door. Operation is
suspended. After closing the door, press the
…
button again.
Operation continues.
Cancelling the setting
Press and hold the
…
button for a few seconds. The setting is
cancelled. Make new settings or switch the appliance off at the
main switch.
Electronic clock
Your appliance has various clock functions.
In this section, the following are explained:
■
The clock display
■
how to set the timer
■
how your appliance is automatically switched off (cooking
time)
■
how to set or change the clock.
Clock display
Notes
■
Between the times
ƒƒ
:
‹‹
and
†
:
†Š
the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■
When the Timer
Q
and Cooking time
x
clock functions are
in use, a signal sounds after the settings have elapsed and
the corresponding symbol flashes. To stop the audible signal
before it finishes, press the clock function
ÁÀ
button
■
If you wish to cancel a setting, turn the set time back to
‹
:
‹‹
and switch the appliance off.
■
The setting can be corrected using the rotary selector if
necessary.
Switching the clock display on and off
1. Press and hold the clock function button
ÁÀ
for a few
seconds.
The clock display is switched off. If a clock function is active,
the associated symbol remains illuminated.
2. Press and hold the clock function button
ÁÀ
for a few
seconds.
The clock display switches on.
Timer
1. Press the
KJ
clock function button repeatedly until the
KJ
and
Q
symbols light up.
2. Set the duration using the rotary selector (e.g.
†
:
‹‹
minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
Clock function
Use
Q
Timer
You can use the timer as an egg timer or
a kitchen timer. The appliance does not
switch on or off automatically
x
Cooking time
The appliance switches off automatically
after a set cooking time
x
(e.g.
‚
:
„‹
hours)
3
Clock
Setting the clock
&ORFN IXQFWLRQ EXWWRQ
5RWDU\ VHOHFWRU