Belkin F5D7632uk4v3000 - Manual (Page 71)

71
Setting Up your Computers
71
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
4.
Write down the IP address and subnet mask
from the “IP Address” tab (3).
5.
Click the “Gateway” tab (2). Write down the gateway address in the chart.
6.
Click the “DNS Configuration” tab (1). Write down the DNS address(es) in
the chart.
7.
If not already selected, select “Obtain an IP address automatically” on the
IP address tab. Click “OK”.
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the Router.
Set up the computer that is connected to the cable or DSL modem by FIRST
using these steps. You can also use these steps to add computers to your
Router after the Router has been set up to connect to the Internet.