Belkin F5D7632uk4v3000 - Manual (Page 47)

47
Manually Configuring your Router
47
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
7.
Check the box that says “Enable ONLY specific Access Points to
connect” (1).
8. In the field named “AP1” (3), type in the MAC address of your
secondary Access Point. When you have typed in the address,
click “Apply Changes”.
9.
Bridging is now set up.
Note
: It may take up to a minute for the bridged connection to
properly establish itself. In some cases it may be necessary to restart
the access point and the router to initiate the bridge.