Billion Electric Company BiPAC 7300GX - Manual (Page 31)

30
Protocol: The current ATM protocol in the device.
VPI / VCI: The current value of VPI/VCI in the device.
Username: To show current authentication username.
IP Address: To show current value of IP address in the device.
Set Wireless configuration
WLAN Service: Default setting is set to Enable. If you don’t want to use wireless, both
802.11g and 802.11b, device in your network, you can select Disable.
ESSID: The ESSID is the unique name of a wireless access point (AP) to be
distinguished from another. For security propose, change to a unique ID name to the AP
which is already built-in to the router’s wireless interface. It is case sensitive and must not
excess 32 characters. Make sure your wireless clients have exactly the ESSID as the
device, in order to get connected to your network.
Channel ID: Select the ID channel that you would like to use.
Security Mode: You can disable or enable with WPA or WEP for protecting wireless
network. The default mode of wireless security is Disable.