BenQ SP870 - Manual (Page 42)

42 Operation
FUNCTION
(default setting/value)
DESCRIPTION
3D Color
Management See "3D Color Management" on page 32 for details.
Save Settings
Saves the settings made for User 1 or User 2 mode.
Quick Auto Search
(On)
See "Switching input signal" on page 26 for details.
Color Space
Conversion
(RGB)
See "Changing Color Space" on page 26 for details.
Presentation Timer
Reminds the presenter to finish the presentation within a certain time
frame. See
"Setting the presentation timer" on page 33 for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See "Using the
On-Screen Display (OSD) menus" on page 23 for details.
Projector Position
(Front Table)
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. See
"Choosing a location" on page 12 for details.
Auto Power Off
(Disable)
Allows the projector to turn off automatically if no input signal is detected
after a set period of time. See
"Setting Auto Power Off " on page 45 for
details.
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
"Hiding the image" on
page 35 for details.
Panel Key Lock
(Off)
Disables or enables all panel key functions except Power on the projector
and keys on the remote control. See
"Locking control keys" on page 36 for
details.
Timer Controller
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Splash Screen
(BenQ logo)
Allows you to select which logo screen will display during projector start-
up. Four options are available: BenQ logo, Black screen, Blue screen or My
Screen.
My Screen
Captures and stores the projected picture as My Screen. See "Creating your
own startup screen" on page 37 for details.
Quick Cooling
(On)
Enables or disables the Quick Cooling function. Selecting On enables the
function and projector cooling time will be shortened from a normal 90-
second duration to approximately 30 seconds.
If you attempt to restart the projector right after the 30-second
quick cooling process, it will rerun its cooling fans for
approximately 60 seconds before energizing the lamp.
High Altitude Mode
(Off)
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 36 for details.
Audio Settings
Mute (Off)
Volume (5)
Power on/off ring tone (On)
See "Adjusting the sound" on page 37 for details.
2. PICTURE
men
u
3. SOURCE
men
u
4. SYSTEM SETUP: Basic menu
5. SYSTEM SETUP:
Advanced men
u