Description of each menu, Displa y menu 2. picture me n u – BenQ SP870 User Manual

Page 41

Operation

Description of each menu

FUNCTION
(default setting/value)

DESCRIPTION

Wall Color

(Off)

Corrects the projected picture’s color when the projection surface is not
white. See

"Using Wall Color" on page 30

for details.

Aspect Ratio

(Auto)

There are four options to set the image's aspect ratio depending on your
input signal. See

"Selecting the aspect ratio" on page 29

for details.

Keystone

(0)

Corrects any keystoning of the image. See

"Correcting keystone" on page

for details.

Position

(0)

Displays the position adjustment page. To move the projected image, use
the directional arrow keys. The values shown on the lower position of the
page change with every key press you made until they reach their
maximum or minimum.

Phase

(depends on the selected

input signal)

Adjusts the clock phase to reduce image distortion.

H. Size

(depends on the selected

input signal)

Adjusts the horizontal width of the image.

Digital Zoom

(100%)

Magnifies or reduces the projected image. See

"Magnifying and searching

for details" on page 28

for details.

Picture Mode

(PC/DVI-D: Dynamic;

YPbPr/ S-Video/ Video:

Standard)

Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See

"Selecting a picture

mode" on page 30

for details.

Reference Mode

Selects a picture mode that most suits your need for the image quality and
further fine-tune the image based on the selections listed on the same
page below. See

"Setting the User 1/User 2 mode" on page 31

for details.

Brightness

Adjusts the brightness of the image. See

"Adjusting Brightness" on page 31

for details.

Contrast

Adjusts the degree of difference between dark and light in the image. See

"Adjusting Contrast" on page 31

for details.

Color

(0)