Remote control – BenQ SP870 User Manual
Page 10
10
Introduction
Remote control
1.
Power
Toggles the projector between standby mode and
on. See
"Starting up the projector" on page 22
and
"Shutting down the projector" on page 38
for
details.
2.
ASPECT
Selects the display aspect ratio. See
for details.
3.
CAPTURE
Captures the projected picture and save it as your
startup screen. See
for details.
4.
Keystone/Arrow keys (
/ Up,
/
Down)
Manually corrects distorted images resulting from
an angled projection. See
for details.
5.
MENU/EXIT
Turns on the On-Screen Display (OSD) menu.
When the OSD menu is activated, exits and saves
the menu settings. See
Display (OSD) menus" on page 23
for details.
6.
Left/
Starts the FAQ function. See
for details.
7.
BLANK
Used to hide the screen picture. See
for details.
8.
ENTER
Enacts the selected On-Screen Display (OSD)
menu item.
for details.
9.
TIMER ON/SHOW
Activates or displays an on-screen timer based on
your own timer setting. See
presentation timer" on page 33
for details.
10.
BRIGHTNESS
Displays the BRIGHTNESS adjustment bar. See
"Adjusting Brightness" on page 31
for details.
11.
CONTRAST
Displays the CONTRAST adjustment bar. See
"Adjusting Contrast" on page 31
for details.
12.
TIMER SETUP
Enters presentation timer setting directly. See
"Setting the presentation timer" on page 33
details.
13.
Indicator light
Flashes or lights red when any key on the remote
control is pressed.
14.
MODE
Depending upon which input signal is selected,
selects an available picture mode. See
for details.
15.
FREEZE
Freezes the projected picture. See
for details.
16.
MUTE
Toggles projector audio between on and off. See
for details.
17.
AUTO
Automatically determines the best picture timings
for the displayed picture. See
for details.
I
I