Nokia N810 WiMax - Manual (Page 15)

Your device
15
Device lock
To prevent unauthorized use of your device, change the
lock code, and set the device to automatically lock after a
certain time-out period.
To lock the device, briefly press the power key, select
Lock device > OK . If you have not set the lock code, you
are asked to do so. To unlock the device, enter the lock
code, and select
OK .
To edit the device lock settings, tap , and select
Settings > Control panel . In Control panel , select
Device lock .
To set the time-out period, select Autolock period and the
desired time.
Change lock code
To change the lock code, do the following:
1. Tap , and select Settings > Control panel .
2. In Control panel , select Device lock >
Change lock code .
3. Enter the current lock code, and select OK . The default
code is 12345.
4. Enter the new code, and select OK .
5. Enter the new code again, and select OK .
If you select Cancel in any of these dialogs, the device lock
code is not changed.
Keep the new code secret and in a safe place separate from
your device.
Note: If you lose the device lock code, you
must take the device to a Nokia authorized
service facility. To unlock the device, the
software must be reloaded, and all data you
have saved in the device may be lost.
Lock touch screen and keys
The touch screen and key lock prevents accidental
operation of the device when it is switched on. When the
touch screen and keys are locked, the device plays no key
tones and accepts no keypresses except for unlocking the
touch screen and keys.
To lock the touch screen and keys, push to the left. To
unlock the touch screen and keys, push to the left
again.
Memory management
To view current storage memory consumption, tap ,
and select Settings > Control panel . In Control panel ,