Nokia 7373 - Manual (Page 51)

S e t t i n g s
50
Personal config. sett. — to add new personal accounts for various services manually
and to activate or delete them. To add a new personal account if you have not
added any, select
Add new ; otherwise, select Options > Add new . Select the service
type, and select and enter each of the required parameters. The parameters differ
according to the selected service type. To delete or activate a personal account,
scroll to it, and select
Options > Delete or Activate .
■ Security
When security features that restrict calls are in use (such as call restriction,
closed user group, and fixed dialing) calls still may be possible to the official
emergency number programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request — to set the phone to ask for your PIN
or UPIN code every time the phone is switched on. Some SIM cards do not allow
the code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using
a specific phone feature which is protected by the PIN2 code. Some SIM cards
do not allow the code request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from your
phone (network service). A restriction password is required.
Fixed dialing — to restrict your outgoing calls to selected phone numbers if this
function is supported by your SIM card. When the fixed dialing is on, GPRS
connections are not possible except while sending text messages over a GPRS
connection. In this case, the recipient’s phone number and the message center
number must be included in the fixed dialing list.
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — to set the phone to ask for the security code whenever
a new SIM card is inserted into the phone. If you select Memory , the phone asks
for the security code when the SIM card memory is selected, and you want to
change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code,
or restriction password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority
or user certificates downloaded into your phone. See "Certificates," p. 69.
Security module sett. — to view Secur. module details , activate Module PIN
request , or change the module PIN and signing PIN. See also "Access codes," p. 9.