Nokia N90 - Manual (Page 44)

Camera
a
n
d
Galler
y
35
• To make lighting and color adjustments before taking a
picture, press the joystick, or select Options > Image
setup > Scene , Flash , White balance , Exposure value ,
or color tone . See “Setup settings—Adjust color and
lighting‚" p. 36.
• The quality of a zoomed picture is lower than that of a
nonzoomed picture.
• The camera goes into battery saving mode if there are
no key presses in a while. To continue taking pictures,
press the capture key.
After the image is taken, note the following:
• If you do not want to keep the image, select
Options > Delete .
• To return to the viewfinder to take a new picture, press
the capture key halfway down.
• To send the image Via multimedia , Via e-mail , or Via
Bluetooth , select Options > Send . For more information,
see “Messaging‚" p. 55 and “Bluetooth connection‚"
p. 78. This option is not available during an active call.
• To send an image to the other party during an active
call, select Options > Send to caller .
• To edit the picture, select Options > Edit . See “Edit
images‚" p. 39.
• To print the picture, select Options > Print . See “Image
print‚" p. 48.
Take pictures in a sequence
Select Options > Sequence mode to set the camera to take
six pictures in a sequence. You can also use the sequence
mode with the self-timer. See “You in the picture—self-
timer‚" p. 35. The pictures are automatically saved in
Gallery .
To take the pictures, press and hold the capture key. If you
want to take less than six pictures, release the capture key
after the desired amount of pictures.
After taking the pictures, they are shown in a grid on the
main display. To view a picture, press the joystick to open it.
To return to the sequence mode viewfinder, press the
capture key halfway down.
You in the picture—self-timer
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the self-timer
delay, select
Options > Activate self-timer > 2 seconds or
10 seconds . To activate the self-timer, select Activate . The
self-timer indicator ( ) blinks and the device beeps when
the timer is running. The camera takes the picture after the
selected delay has elapsed. You can also use the self-timer
Activate self-timer in the sequence mode. See “Take
pictures in a sequence‚" p. 35.
Tip! Select Options > Activate self-timer > 2 seconds
to keep your hand steady when taking a picture.