Nokia 6315i - Manual (Page 64)

S e t t i n g s a n d t o o l s
63
Stop watch
The stop watch can be used for elapsed time measurement,
such as for a sporting event. Up to eight events or records
can be timed simultaneously.
The stop watch accuracy is not the same as that of a professional
instrument. Therefore, Nokia advises against its use for official
competitions or any other event in which a high-precision
device would be required to establish exact times.
To time a single event, select Menu > Settings & Tools >
Tools > Stop Watch > Start . The elapsed time is displayed in
h:mm:ss:ms format. To stop or pause the stop watch, select
Stop . To resume the stop watch from the stopped time, select
Start again. To reset the stop watch to zero, select Reset
with the watch in stopped mode.
To time multiple events, select Menu > Settings & Tools >
Tools > Stop Watch > Start . To mark the elapsed time for
each event you are measuring, select Cont . To display the
event times, select View .
■ Sounds settings
To adjust volumes and assign sounds to phone calls and
alarms, select
Menu > Settings & Tools > Sounds Settings
and from the following options:
Master Volume —Use the volume keys or scroll key to change
the volume setting of your phone from High to Low or to Alarm
Only or Vibrate Only , then select OK . To silence the phone, scroll
down, or press and hold the volume down key until All Sounds
Off is displayed. To preview the sound level, select Play .
Call Sounds —To set ringtones for incoming calls, select Call
Ringtone . To set the phone to vibrate when a call is received,
select Call Vibrate > On .
Alert Sounds —Select the alert type ( Tone , Vibrate , or Reminder )
for an incoming TXT Message , PIX Message , or Voicemail Msg .