Nokia 6230 User Manual
Page 67
54
Copyright © 2004 Nokia
•
SMTP user name—Enter the user name for outgoing mails that you have
obtained from your e-mail service provider. If you do not enter an SMTP
user name, the e-mail server uses the POP3 or IMAP4 user name instead.
•
SMTP password—Enter the password that you want to use for outgoing
mails. If you do not enter an SMTP password, the e-mail server uses the
POP3 or IMAP4 password instead.
•
Outgoing (SMTP) port—Enter the number of the e-mail server port for
outgoing e-mail. The most common default value is 25.
If you selected POP3 as the incoming server type, the following options are
shown:
•
Incoming (POP3) port—Enter the port number that you have obtained
from your e-mail service provider.
•
Reply-to address—Enter the e-mail address to which you want the replies
to be sent.
•
Secure login—Select On if your connection requires an encrypted login;
otherwise select Off. Contact your service provider if in doubt. Using
encrypted login enables increased security for user names and passwords.
It does not increase security for the connection itself.
•
Retrieve e-mails—Enter the maximum number of e-mails that you want
to retrieve at a time.
•
SMTP connection settings—Define the connection settings required for
outgoing e-mail.
•
POP3 connection settings—Define the connection settings for incoming
e-mail. See “Set up for browsing” on page 139.
If you selected IMAP4 as the incoming server type, the following options are
shown:
•
Incoming (IMAP4) port—Enter the port number that you have obtained
from your e-mail service provider.
•
Reply-to address—Enter the e-mail address to which you want the replies
to be sent.
•
Retrieve e-mails—Enter the number of e-mails that you want to retrieve
at a time.
•
Retrieval method—Select Latest to retrieve all new received e-mails, or
select Latest unread to retrieve only e-mails that you have not read.
•
SMTP connection settings—Define the connection settings required for
outgoing e-mail.
•
IMAP4 connection settings—Define the connection settings required for
incoming mail. See “Set up for browsing” on page 139.