Nokia 6230 - Manual (Page 47)

34 Copyright © 2004 Nokia
Once you change the security code from its preset of 12345, keep the new code
secret and in a safe place separate from your phone. Use this procedure to change
your security code.
1 From the menus, select Settings > Security settings > Access codes > Change
security code.
2 At the prompt, enter the current security code (default 12345), and select OK.
3 At the prompt, enter the new security code, and select OK.
4 At the prompt, enter the new security code again, and select OK.
PIN code
Before you can change your PIN code, you need to enable PIN code request. See
“PIN code request” on page 29.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN code.
2 At the prompt, enter the current PIN code, and select OK.
3 At the prompt, enter the new PIN code, and select OK.
4 At the prompt, enter the new PIN code again, and select OK.
PIN2 code
The PIN2 code is required for features such as fixed dialing. If you enter an incorrect
PIN2 code three times in succession, the PIN2 code is blocked and you will have to
enter the PUK2 code.
The original PIN2 code must be obtained from your service provider.
Use this procedure to change your PIN2 code.
1 From the menus, select Settings > Security settings > Access codes >
Change PIN2 code.
2 At the prompt, enter the current PIN2 code, and select OK.
3 At the prompt, enter the new PIN2 code, and select OK.
4 At the prompt, enter the new PIN2 code again, and select OK.
PUK and PUK2 code
The PUK code is required to change a blocked PIN code. The PUK2 code is required
to change a blocked PIN2 code. If the codes are not supplied with the SIM card,
contact your service provider.