Nokia 6340i - Manual (Page 74)

[ 67 ]
Customize your phone
HDC-9P headset voice dialing
Once you have set up voice tagged entries in your phone book, you can
make a call with the HDC-9P headset by simply pressing and holding the
remote button on the microphone. See “Assign a voice tag” on page 52 for
information on setting up voice tags.
1 At the start screen, press and hold the remote button on the headset.
Your phone beeps and Please speak now appears in the display.
2 Within 3 seconds, pronounce the voice tag into the microphone.
Once the voice tag is recognized, the tagged entry appears in the
display, replays through the earpiece, and the number is dialed.
• AUDIO SETTINGS
Much like a stereo, your phone audio can be customized. You can choose
from a list of four equalizer presets or create up to two custom sets of
your own.
Activate an equalizer set
1 From the menus, select Settings > Call settings > Equalizer.
After a brief pause, the following equalizer sets appear in the display:
Normal—Switches the equalizer off.
Bright—Amplifies higher frequencies.
Dark—Amplifies lower frequencies.
Loudness—Amplifies both higher and lower frequencies.
Set 1—Lets you customize an equalizer setting.
Set 2—Lets you customize an equalizer setting.
2 Select the equalizer set of your choice.
If you selected Normal, Bright, Dark, or Loudness, a confirmation
message appears and the equalizer set is activated.
If you selected Set 1 or Set 2, a list of options appears. Select
Activate to activate the equalizer set.
6340i.ENv1_9310019.book Page 67 Thursday, July 10, 2003 3:21 PM