Nokia N800 - Manual (Page 16)

Your device
16
Nokia N810 Internet Tablet—Your device has an external
memory card slot under the desk stand on the front right
corner of the device. Your device also includes a non-
removable internal memory card. You can view the content
of the internal memory card in
Utilities > File manager .
The supported memory card formats are as follows:
• miniSD card
• microSD card (with adapter)
You can insert and remove a memory card when the
internet tablet is switched on (hot swap feature), if the
memory card is not being used by an application.
Nokia internet tablets do not support the write protection
feature of SD cards.
Use only compatible MultiMediaCards (MMC), Reduced
Size MultiMediaCards, SD cards, microSD cards, or miniSD
cards approved by Nokia for use with this device. Nokia
uses approved industry standards for memory cards, but
some brands may not be fully compatible with this device.
Incompatible cards may damage the card and the device
and corrupt data stored on the card.
You can only use FAT 16/32 formatted compatible memory
cards with Nokia internet tablets.
To view and manage the contents of a memory card, tap
, select Utilities > File manager and the desired
memory card from the folder list.
To rename a memory card in file manager, select >
File > Rename... .
To format a memory card in file manager, select >
Tools > Format memory card... . All data is permanently
deleted from the memory card.
Back up and restore data
You can back up data to a compatible external or internal
memory card and restore it, if necessary. The backup
appears as a folder on the memory card. You can also
secure the backup with a password.
To back up data, do the following:
1. Tap , and select Settings > Backup/Restore >
New backup .
2. In New backup , change the name of the backup and
define the desired location of the backup.
3. In Select data for backup , select data types you want
to back up.
To protect the backup with a password, select
Protect with password > OK , enter twice the password
you want to use, and select OK .