Nokia 6185i - Manual (Page 53)

46
Lock code
You’ll need the lock code to activate and deactivate Phone
Lock (
see page 62 ), or to change your lock code. The default
lock code is 1234 (or the last four digits of your phone
number, depending on your service provider). If you enter
an incorrect lock code five times in a row,
your phone will
prompt you for the security code ( see page 70 ).
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter Menu 4-3-2-3 (Settings - Security settings -
Access codes - Change lock code).
2. Enter lock code at Enter lock code: and press OK.
3. Enter new lock code, press OK.
4. Verify new lock code, press OK.
Note: When you change your lock code, make sure you
store it in a safe place, away from your phone. Avoid
entering access codes similar to emergency numbers
to prevent accidental emergency calls.
Manual touch tones
This setting determines how long touch tones are produced
as you press the keys on the keypad. Note that touch
tones are sometimes called DTMF tones.
Note: See “Touch tone length” on page 74 for details.
Setting manual touch tones
Press Menu 4-2-3-1 (Settings - Phone settings - Touch
tones - Manual touch tones) and highlight one of the
following options, then press OK.
Continuous means the tone sounds for as long as
you press and hold the key.
Fixed sets the tone length to .1 second, regardless
of how long you press the key.
Off turns the tones off, and no tones will be sent
when you press the keys.