Nokia 6162 - Manual (Page 77)

70
Note: See “Special characters (for storing numbers)” on
page 37 for details on “p” and “w” characters.
When you dial this number, your phone first dials the phone
number, then waits (because of the “w” character) for you
to press Send. Your phone then sends your password.
If you include a “p” character instead of a “w”, your
phone pauses for 2.5 seconds, then automatically
sends your password as touch tones.
Touch tone length
This feature determines the length of each touch tone
when they are sent automatically.
Short sets the tone length to .1 second. Long sets the
tone length to .5 second.
You can set the touch tone length by pressing Menu
4 2 3 2 (Settings - Phone settings - Touch tones - Touch
tone length).
Unlocked phone number
When the phone lock is on (see page 52), no calls can
be made. However, you can store one number into your
phone that can be called when it’s locked.
Storing the unlocked phone number
1. Press Menu 4 3 2 2 (Settings - Security settings -
Access codes - Unlocked phone number)
2. Enter lock code and press OK
3. Enter phone number at Number: (or press Search
and scroll through the phone book)
4. Press OK
Calling the unlocked phone number
Note: Your phone must be locked to use this feature.
Press W or V once, then
ó
or you can manually
enter the phone number as it is stored and press
у
.