Nokia 6162 User Manual

Page 35

Note: The order of the following steps may vary, depending on
which dialing sequence your card uses.

6. Enter access number when prompted for the

calling card’s access number (usually the 1-800
number listed on the back of the calling card),
press OK

Note: You can also retrieve the access number from your phone
book if it has already been stored. Simply press

Search

, then

to find the number.

7. Enter card number and/or PIN when prompted to

enter calling card number and personal
identification number, then press OK. Press OK
again at Save changes?

8. Press

to Card name and press Select. Enter

card name using your phone’s keypad, press OK.

See “Entering letters and numbers” on page 35 if you need
help on entering the card name

For details about your phone’s security code, see “Security
code” on page 62.

*These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to change
at the phone company’s discretion.

Dialing

Sequence

Use for cards that

require you to:

Cards using

this

sequence

Access no.
+ phone no.
+ card no.

Dial 1-800 access number,
then phone number, then card
number (+ PIN if required)

MCI, AT&T True
Choice, Sprint
Canada, Unitel

Access no.
+ card no.
+ phone no.

Dial 1-800 access number,
then card number (+ PIN if
required), then phone number

networkMCI,
WorldPhone MCI

Prefix
+ phone no.
+ card no.

Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)

GTE, PacBell,
AT&T, Stentor