beautypg.com

Changing your lock code, Manual touch tones, Memory status – Nokia 6162 User Manual

Page 50: Manual touch tones memory status

background image

43

Changing your lock code

In a lock code, only numeric characters are accepted.

1. Enter Menu 4 3 2 3 (Settings - Security settings -

Access codes - Change lock code)

2. Enter lock code at Enter lock code: and press OK

3. Enter new lock code, press OK

4. Verify new lock code, press OK

Note: When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.

Manual touch tones

This setting determines how long touch tones are
produced as you press the keys on the keypad. Note
that touch tones are sometimes called DTMF tones.

See “Touch tones” on page 69 for details.

Setting manual touch tones

Press Menu 4 2 3 1 (Settings - Phone settings - Touch
tones
- Manual touch tones) and highlight one of the
following options, then press OK.

Continuous means the tone sounds for as long as
you press and hold the key.

Fixed sets the tone length to .1 second, regardless
of how long you press the key.

Off turns the tones off, and no tones will be sent
when you press the keys.

Memory status

This feature allows you to see how many free and in-use
memory locations are in your directory.

Also, see “Phone book” on page 49.

Press Names, scroll to Options and press Select.
Then scroll to Memory status and press Select again