Enhancements – Nokia 6126 User Manual
Page 89

56
To set a language for the voice playback, select Voice playback language. See ”Enhanced
voice dialing,” p. 17 and Voice commands in ”My shortcuts,” p. 50.
Security keyguard — to set the phone to ask for the security code when you unlock the
keyguard. Enter the security code, and select On.
Automatic keyguard — to set the keys to lock automatically after a preset time delay when
the phone is in the standby mode and no function of the phone has been used. Select On,
and you can set the time from 5 seconds to 60 minutes.
Welcome note — to write the note you would like to have briefly displayed when the phone
is switched on.
Flight query > On — the phone asks every time when it is switched on whether the flight
profile shall be used. With flight profile all radio connections are switched off. The flight
profile should be used in areas sensitive to radio emissions.
Phone updates — to receive phone software updates from your service provider (network
service). This option may not be available, depending on your phone. See ”Phone software
updates,” p. 58.
Help text activation — to select whether the phone shows help texts.
Start-up tone — to select whether the phone plays a start-up tone when the phone is turned on.
Switch off tone — to select whether the phone plays a switch off tone when the phone is
turned off. This menu is only visible if the tone exists in Set theme or is part of the powering
down functionality of your service provider.
■
Enhancements
This menu or the following options are displayed only if the phone is or has been connected
to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and depending on the
enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated when you
connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically after 5
seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off.
Lights — to set the lights permanently On. Select Automatic to set the lights on for 15
seconds after a key press.
TTY/TDD > Use TTY > Yes — to use the TTY settings instead of headset or loopset settings.
If your phone is provided with a hearing aid coil, select Hearing aid > T-coil hearing aid
mode > On to optimize the sound quality when using a T-coil hearing aid. The
icon is
displayed when the T-coil hearing aid mode is active.