Nokia 6126 - Manual (Page 88)

55
USB data cable
You can use the USB data cable to transfer data between the phone and a compatible PC or
a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. A
USB data cable can be purchased as an accessory.
To activate the phone for data transfer or image printing, connect the data cable; when the phone
displays USB data cable connected. Select mode., select OK. Select from the following modes:
Default mode — to use the cable for PC Suite
Printing — to print images directly from the phone using a compatible printer
Data storage — to activate the memory card for data transfer.
To change the USB mode, select Menu > Settings > Connectivity > USB data cable >
Default mode, Printing, or Data storage.
■ Call
Select Menu > Settings > Call settings and from the following options:
Call forwarding — to forward your incoming calls (network service). You may not be able to
forward your calls if some call restricting functions are active. See Call restrictions in
”Security,” p. 57.
Anykey answer > On — to answer an incoming call by briefly pressing any key except the
power key, the camera key, the left and right selection keys, or the end key.
Answ. when fold opened > On — to set your phone to answer a call when you open the fold. If
the setting is off, you must press the call key after you open the fold.
Automatic redial > On — to make a maximum of 10 attempts to connect the call after an
unsuccessful call attempt.
Speed dialing > On — to dial the names and phone numbers assigned to the speed dialing
keys 2 to 9 by pressing and holding the corresponding number key.
Call waiting > Activate — to have the network notify you of an incoming call while you have
a call in progress (network service). See ”Call waiting,” p. 18.
Summary after call > On — to briefly display the approximate duration of the call after each call.
Send my caller ID > Yes — to show your phone number to the person you are calling (network
service). To use the setting agreed upon with your service provider, select Set by network.
Line for outgoing calls — to select the phone line 1 or 2 for making calls if supported by your
SmartChip card (network service).
■ Phone settings
Select Menu > Settings > Phone settings and from the following options:
Language settings — to set the display language of your phone, select Phone language. If
you select Automatic, the phone selects the language according to the information on the
SmartChip card.