Nokia 6340 - Manual (Page 72)

[ 63 ]
Customize your phone
10
Note: If the loopset is enabled, you’ll be asked to disable the
loopset before enabling TTY/TDD. Press Yes to disable the loopset
(thus enabling TTY/TDD). Press No to leave the loopset enabled.
Connect TTY hardware
1 The TTY device comes
with a cable. Plug the
larger end of this
cable into the input
jack on the TTY.
2 Plug the other end of
the cable into the TTY
adapter HDA-8.
3 Plug the HDA-8 into
the connector on the
bottom of your phone.
Make a call with TTY
Note: You must have a an accessory attached to your phone prior
to selecting the accessory settings menu.
1 At the Start screen, press Menu 4-6-4-1-1 (Settings - Accessory
settings - TTY/TDD - Use TTY - Yes). After a brief pause, a confirmation
message appears in the display.
Note: After selecting Yes, this becomes the default and you won’t
have to do it again unless you turn TTY/TDD off.
2 Press to return to the Start screen.
3 Enter the number you wish to call (on the phone) and press .
4 When the receiving party answers, begin typing your conversation on
the TTY.
End a TTY call
• Press on the phone