Nokia 7380 - Manual (Page 43)

M e n u f u n c t i o n s
42
Radio
To listen to the radio on your phone, connect the compatible headset to the headset
connector on the bottom of the phone. The lead of the headset functions as the
radio antenna, so let it hang freely. The quality of the radio broadcast depends on the
radio station coverage in that particular area. To turn on the radio, select
Menu >
Media > Radio . The channel location number, the name of the radio channel (if you
have saved the channel), and the frequency of the radio channel are displayed. If you
have already saved radio channels, scroll and select a radio channel location 1 to 20.
Tune and save radio channels
When the radio is on, select or and press Select to change the radio
frequency in 0.05 MHz steps, or press and hold Select to start the channel search.
Searching stops when a channel is found. To save a channel, select Options >
Save channel. Enter the name of the channel, and select Options > Accept.
Use the radio
When the radio is on, select or to scroll to the previous or next saved
channel or select Options , and from the following options:
Turn off —to turn off the radio
Volume —to set the volume of the radio
Channels —to view the channel list. Select Options to rename or to delete
the channel.
Loudspeaker (or Headset )—to listen to the radio using the loudspeaker (or headset).
Keep the headset connected to the phone. The lead of the headset functions as the
radio antenna.
Set frequency —Enter the frequency of the radio channel that you want to listen
to. You can enter a frequency between 87.5 MHz and 108.0 MHz. To set the
frequency, select
Options > Accept .
Voice recorder
You can record pieces of speech, sound, or an active call for up to 3 minutes. This
is useful when you want to record a name and phone number to write down later.
The recorder cannot be used when a data call or GPRS connection is active.
Recording
1. Select Menu > Media > Voice recorder .
2. To start the recording, select Record . To start the recording during a call,
select Options > Record . While recording a call, all parties to the call hear a
faint beeping sound about every 5 seconds.