Countdown timer, Stopwatch – Nokia 3220 User Manual

Page 53

Countdown timer

Select Menu > Applications > Extras > Countdown timer. Enter the alarm time
in hours, minutes, and seconds, and select OK. You can write your own text to be
displayed when the time expires, and select Start to start the countdown timer.

To change the countdown time, select Change time, or to stop the timer, select
Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone
sounds a tone and flashes the note text if it is set; otherwise, it flashes the text
Countdown completed.

To stop the alarm, press any key. If no key is pressed, the alarm automatically
stops within 30 seconds. To stop the alarm and delete the note text, select Exit.

Stopwatch

You can use the stopwatch to measure time, take intermediate times, or take
lap times.

TIME OBSERVATION AND TIME SPLITTING

Select Menu > Applications > Extras > Stopwatch > Split timing. Select
Start to start the time observation. Select Split every time you want to take an
intermediate time; the intermediate times are listed below the running time on
the display. Select Stop to stop the time observation. To save the times, select
Save. Select Options to start the time observation again or reset the times
without saving.

LAP TIMES

Select Menu > Applications > Extras > Stopwatch > Lap timing. Select
Start to start the time observation and Lap to take a lap time. Select Stop to
stop the lap timing. To save the times, select Save and enter a name. Select
Options to save or reset the lap times.

USE OTHER PHONE FEATURES WHILE TIMING

If you have already started the stopwatch and want to use other phone features
while the stopwatch continues to run, press the End key to return to the
standby mode. To return to the stopwatch, select Menu > Applications >
Extras > Stopwatch > Continue.

Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces battery life.

VIEW AND DELETE TIMES

Select Menu > Applications > Extras > Stopwatch.

If the stopwatch is not reset, you can select Show last time to view the most
recent measured time. Select View times to select from a list of names or final
times of the time sets.

To delete the saved times, select Delete times. Select Delete all > Yes or
One by one. Scroll to the times you want to delete, and select Delete > Yes.