Nokia 7280 - Manual (Page 42)

C o n t a c t s
41
Make a call using a voice tag
1. In the standby mode, press and hold the Lower selection key.
A short tone is heard and Speak now is displayed.
2. Say the voice tag clearly into the microphone.
The phone plays the recognized voice tag and automatically dials the number.
■ Info and service numbers
Your service provider may have included information numbers or service numbers
in your SIM card. These menus are only shown if supported by your SIM card.
Select Menu > Contacts > Info numbers or Service numbers . Scroll through a
category for an information number or a service number, and press the Call key
to call the number.
■ My numbers
The phone numbers assigned to your SIM card are saved in My numbers , if this is
supported by the SIM card. To view the numbers, select Menu > Contacts > My
numbers , scroll to the name or number you want, and select View .
■ Caller groups
You can arrange the names and phone numbers saved in Contacts into caller
groups. For each caller group, you can set the phone to sound a specific ringing
tone and show a selected graphic on the display when the phone recognizes a
call from a phone number in the group.
Select Menu > Contacts > Caller groups , the caller group you want, and one of
the following:
Rename group —Enter a new name for the caller group, and select OK .
Group ringing tone —Select the ringing tone for the group. Default is the ringing
tone selected for the currently active profile.
Group logo —Select On to set the phone to activate the group logo, Off to set the
phone to deactivate the logo, or View to view it.
Group members —Select Add to add a name to the caller group, scroll to the name
you want to add to the group, and select Add . To remove a name from a caller group,
scroll to the name that you want to remove, and select Options > Remove contact .