Nokia 7280 - Manual (Page 21)

P h o n e s e c u r i t y
20
4. Phone security
Your phone is equipped with different security features that allow you to do
the following:
• Avoid making accidental calls
• Prevent unauthorized use of your phone
■ Lock the keypad (keyguard)
The keyguard disables your keypad to prevent accidental key presses.
Select Menu or Unlock and the Call key within 1.5 seconds to lock or unlock the
keypad. If the Security keyguard is set to On , select Unlock , and enter the
security code.
An incoming call can be operated normally. When you end or reject the call, the
keypad will automatically be locked.
Note: When the keyguard is on, calls may be possible to the emergency
number programmed into your phone.
■ Access codes
• Security code (5 to 10 digits): The security code helps to protect your phone
against unauthorized use. The preset code is 12345.
To change the code and set the phone to request it, see Security settings on
page 56.
• PIN code (4 to 8 digits): The PIN (personal identification number) code helps
to protect the SIM card against unauthorized use. It may be supplied with the
SIM card. If you activate the PIN code request function in the Security
settings menu, the code is requested each time the phone is switched on.
If you enter an incorrect PIN code three times in succession, the SIM card is
blocked. You must enter the PUK code to unblock the SIM card and set a new
PIN code
• PIN2 code (4 to 8 digits): This code may be supplied with the SIM card and
is required to access some functions, such as call counters.