Nokia 7280 - Manual (Page 20)

G e t t i n g s t a r t e d
19
■ The loopset
The LPS-3 loopset gives people with T-coil equipped hearing aids the ability to
make and receive calls without noise interference. Refer to the booklet that
comes with the LPS-3 for complete instructions and safety information.
1. Plug the loopset plug into the jack in the bottom
of the phone, as shown in the illustration.
2. Select Menu > Settings > Enhancement
settings > Loopset .
3. Select Use loopset > Yes .
■ Remove and replace the quick slide
The quick slide has to be removed
to see the type label of the
phone or to clean the phone.
1. To remove the quick slide,
use a fingernail as a lever
to lift the edge of the slide
as shown until the slide
is released.
2. Slide it as shown to remove
the quick slide. Avoid
touching the camera lens.
3. To replace the quick slide,
fit the phone and the slide
together as shown.
4. Push the slide onto the
phone until it snaps
into place.