Nokia C5-03 - Manual (Page 88)

Modify advanced GPRS access point settings
Select Options > Advanced settings .
Select from the following:
Network type — Select the internet protocol type to transfer data to and from your
device. The other settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP address of your device.
DNS addresses — Enter the IP addresses of the primary and secondary DNS servers, if
required by your service provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy server.
Proxy port number — Enter the port number of the proxy server.
Wi-Fi access point settings
Select Menu > Settings and Connectivity > Destinations > Access point , and follow
the instructions.
Edit a wireless LAN (Wi-Fi) access point
Select an access point group and access point marked with . Follow the instructions
from your Wi-Fi service provider.
Select from the following:
Wi-Fi network name — Select Enter manually or Search for networks . If you select
an existing network, the Wi-Fi network mode and Wi-Fi security mode are determined
by the settings of its access point device.
Network status — Define whether the network name is displayed.
Wi-Fi network mode — Select Ad-hoc to create an ad hoc network and to allow
devices to send and receive data directly; a Wi-Fi access point device is not needed. In
an ad hoc network, all devices must use the same Wi-Fi network name.
Wi-Fi security mode — Select the encryption used: WEP , 802.1x , or WPA/WPA2
(802.1x and WPA/WPA2 are not available for ad hoc networks). If you select Open
network , no encryption is used. The WEP, 802.1x, and WPA functions can be used only
if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection using this access point
automatically or after confirmation.
The available options may vary.
88 Connectivity