Brother WL-660 Series - Manual (Page 6)

6
English
Action 4: Connect Your Printer and Computer
You must connect the printer to your computer using an interface cable. A parallel cable is
used for this connection.
1 Make sure that the power cord is unplugged
before connecting or disconnecting the
interface cable.
Also, make sure that the computer is turned
off.
NOTE
The shape of the power cord varies
according to the country of destination.
2 Connect the parallel interface cable to the
connector of the printer. ( ① )
Secure the connection with the wire clips.
( ② )
Connect the interface cable to the printer
port of the computer.
NOTE
For the location of your computer’s parallel
printer port, see the User’s Guide of your
computer.