Fitting or re moving the pedestal stand, English – Toshiba D1434 User Manual
Page 8
English - 6 -
English
Fitting or Re
moving the pedestal stand
Fitting or Rem
oving the pedestal stand
(1) Carefully lay the front of the unit face down on a flat, cushioned surface with the stand hanging over the edge.
(2) To fit the stand use the screws supplied.
or
(3) Remove the screws fixing the pedestal stand
(4) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the
plastic moulding from the TV.
NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD
panel.
For 24D143*DB, 24W143*DB and 24D343*DB models
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight of the LCD TV. and two people are required
for the installation.
(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
MENU WHEEL
see page 14
for functions