Toshiba SD1010 - Manual (Page 13)

E
ng
lis
h
Inserting Batteries
A
Open the battery compartment.
B
Insert two batteries type R03 or AAA, following the
indications (+ / - ) inside the compartment.
C
Close the cover.
CAUTION:
- Never throw batteries into a fire.
- The batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
Note:
- Be sure to use AAA size batteries.
- Dispose of batteries in a designated disposal area.
- Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
- If the remote control does not operate correctly, or if
the operating range becomes reduced, replace batteries
with new ones.
- When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used batteries
in combination.
- Always remove batteries from remote control if they
are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid
from leaking into the battery compartment.
Using the Remote Control to Operate
the System
OPEN/CLOSE DISPLAY
1 2 3
6 5 4
7 8 9
+10 0
T-SEARCH
SETUP MENU
RETURN TITLE
OK
F.R F.F PREV NEXT
STEP STOP PLAY/PAUSE
REPEAT A-B
SUBTITLE ANGLE AUDIO ZOOM
SLOW
PROG RANDOM
S E -R 0268
ON/STANDBY
CLEAR
30 30
Within about 6m (19 feet)
A
Aim the Remote Control directly at the remote sensor
(IR) on the front panel.
B Do not put any objects between the Remote Control
and DVD Player while operating the DVD Player.
Finding your viewing channel
A Press I/2ON/STANDBY on the DVD player to turn it
on.
B
Turn on the TV and set it to the correct Video-In
channel. You should see the blue DVD background
screen.
 Usually these channels are between the lowest
and highest channels and may be called FRONT,
A/V IN or VIDEO. See your TV' s manual for more
details.
 Or, you may go to channel 1 on your TV, then
press the Channel down button repeatedly until you
see the Video In channel.
 Or, the TV remote control may have a button that
chooses different video modes.
C
If you are using external equipment, (such as
audio system or receiver), turn it on and select the
appropriate input source for the DVD player output.
Refer to the equipment user’s manual for detail.
Setting the language
Choose your desired On-Screen Display(OSD)language
where available.
On-Screen Display (OSD) Language
The On-screen language for the system setup menu
will remain as you set it, regardless of various disc
languages.
Audio : English
DivX Subtitle : English
DVD Menu : English
OSD language English
Subtitle
Language
Video
Audio
Misc
Rating
Polski
Hungarian
Português
Français
Deutsch
A
Press SETUP.
B
Press / to select { Language }.
C
Press  to highlight { OSD language }, then press .
D
Press / to select a language and press OK to
confirm.
Subtitle, DivX Subtitle, Audio and DVD
Menu language
You can choose your own preferred language or
soundtrack from Subtitle, DivX Subtitle, Audio and
DVD Menu languages. If the language selected is not
available on the disc, the disc’s default language will
be used instead.
OSD language : English
Subtitle : Auto
Language
Video
Audio
Misc
Rating
DivX Subtitle : Standard
DVD Menu
Audio English
German
Polish
Hungarian
Portuguese
French
A
Press SETUP.
B
Press / to select { Language }, then press .
C
Press / to highlight one of the options below,
then press .
{ Subtitle }
Select this to change the subtitle language.
{ DivX Subtitle }
Select this to change the DivX ® subtitle language.
Getting Started
Helpful hint: Press  to go back to previous menu item.
Press SETUP to exit the menu item.