Toshiba AT270 - Manual (Page 52)

Tethering & portable hotspot settings
You can share your tablet’s mobile data connection with other devices
(up to 8) via USB, Bluetooth, or by turning your tablet into a portable
Wi-Fi hotspot.
Tap to adjust these settings.
This function is only supported by 3G models.
NFC
Some models support Near Field Communication (NFC) which allows
you to share data between devices when they touch each other or are
brought into close proximity.
Wi-Fi direct
Wi-Fi direct allows you to directly connect to devices nearby via Wi-Fi
for much higher-speed wireless communication. You can share files or
streaming videos/audios from other compatible devices.
Tap to enable Wi-Fi direct.
Mobile networks
Tap to set up your wireless service provider’s mobile network.
This function is only supported by 3G models.
Wi-Fi networks
Wi-Fi is a wireless networking technology that can provide Internet access
at distances of up to 100 meters, depending on the Wi-Fi router and your
surroundings.
To use Wi-Fi on your tablet, you need to access a wireless access point, or
“hotspot”. If access points are open you can simply connect to them.
Others are hidden or implement other security features, so you must
configure your tablet so it can connect to them.
There are numerous systems for securing Wi-Fi connections, including
some that rely on secure certificates or other schemes to ensure that only
authorized users can connect.
Turn off Wi-Fi when you are not using it to extend the life of your battery.
The Status bar displays icons that indicate Wi-Fi status.
Connected to a Wi-Fi network (waves indicate the
wireless connection strength)
Notification that an open Wi-Fi network is in range
Turning Wi-Fi on and connecting to a Wi-Fi network
You can turn on and connect to a Wi-Fi network by following steps:
User's Manual 6-2