Toshiba DB833 - Manual (Page 52)

52
English
One Touch Play
The function of HDMI-LINK will automatically
power on the television that was in standby
mode and switch the television’s input source
to the port connected with the audio/video
equipment by powering-on or playing from the
audio/video equipment.
NOTE: This feature is dependent on the
connected equipment and television
setting.
System Standby
This feature automatically switches the con-
nected equipment into standby when the
television goes into standby and conversely
for the television to switch into standby when
connected equipment goes into standby. It is
selected in the HDMI-LINK setup menu.
NOTE: This feature is dependent on the
connected equipment and television
setting.
System Audio Control
Using the Speaker Preference feature allows
the television’s remote control to adjust the
volume or mute the sound of the speakers con-
nected to the television via an AV amplifier.
Ensure that the connected AV amplifier and
HDMI-LINK equipment are selected in the
input source selection and that the Speaker
Preference is set to Audio Receiver in the
HDMI-LINK setup menu.
NOTE: When the AV Amplifier is switched on,
its input source changed or the volume
adjusted, the sound will be output from
the AV Amplifier’s speakers even if TV
speakers has been selected. Turn the
television off then on again to output
the sound from the TV’s speakers.
The full function may not work and is depend-
ent on the amplifier being used.
Enable HDMI-LINK
When the Enable HDMI-LINK is set to On, it
allows the other functions to be enabled.
Press MENU. Press ◄ or ► to select
PREFERENCES and press to enter
the submenu.
PICTURE SOUND SETUP APPLICATIONS PREFERENCES
Press ▲ or ▼ to select HDMI-LINK Set-
up, and press to enter the submenu.
Enter OK Back RETURN
PREFERENCES
HDMI−LINK Setup
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
Auto
Off
On
Off
On
1
OK
Press ▲ or ▼ to select Enable HDMI-
LINK, and press ◄ or ► to select On or
Off.
HDMI-LINK Setup
Enable HDMI−LINK
Auto Power On
Auto Standby
Amplifier Control
Speaker Preference On
On
On
On
TV Speakers
Edit Back RETURN
Auto Power On
The Auto Power On setting allows the televi-
sion to be automatically switched On or Off if a
HDMI-LINK device is turned on or off.
In the HDMI-LINK Setup menu, press ▲
or ▼ to select Auto Power On.
Press ◄ or ► to select On or Off.
HDMI-LINK Menus
By activating the Enable HDMI-LINK feature in the HDMI-LINK setup menu, individual HDMI-LINK
features can then be activated.