Toshiba BDX2000 - Manual (Page 39)

39 EN
FUNCTION SETUP
You can confirm the current software version.
1 Follow steps 1 to 3 in “Connection Test” on
page 36.
2 Use [K / L] to select “Software Update”, then
press [ENTER].
3 Use [K / L] to select “Current Version”, then
press [ENTER].
4 Press [ENTER] or [RETURN] to exit.
You can upgrade the software by using disc.
1 Follow steps 1 to 3 in “Connection Test” on
page 36.
2 Use [K / L] to select “Software Update”, then
press [ENTER].
3 Use [K / L] to select “Disc Update”, then press
[ENTER].
4 Use [K / L] to select “Yes”, then press [ENTER].
5 Disc tray will open automatically.
• Insert the disc for software update and then press
[OPEN/CLOSE A].
6 After completing loading disc, confirmation
message will appear. Select “Yes” and press
[ENTER] to start upgrading.
• It may take awhile to complete the updating. (Please
wait until “100%” appears on the front panel display.)
7 After the disc upgrade finishes, this unit will
restart and eject the disc.
Initialise the setting or SD card.
1
In stop mode, press [SETUP].
2 Use [K / L] to select , then press
[ENTER].
3 Use [K / L] to select a desired option, then
press [ENTER].
• Confirmation message will appear.
“Setup”:
Resets the setup menu to the default.
The setting for “Parental”, “Network Connection” and
“Media Select” will not be reset.
“Format SD Card”
(Available only when an SD card is inserted.):
Initialises the SD card.
“Erase Saved BD-ROM Data (Player)”:
Clears the data saved for the BD-ROM contents,
such as BD-ROM game scores, from this player.
“Erase Saved BD-ROM Data (SD Card)”
(Available only when an SD card is inserted.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the SD card.
“Network Settings”:
Resets the Network Settings menu to the default.
4
Select “Yes”, then press [ENTER].
• Press [ENTER] again to complete the settings.
5 Press [SETUP] to exit.
Software Update
Current Version
Note
• Please visit http://www.toshiba-om.net to download
the latest firmware version.
Disc Update
Note
• You can check the current firmware version in
“Current Version” in “Software Update” menu.
• Please do not unplug the mains cable while
executing “Disc Update”.
• All settings will remain the same even if you update
the firmware version.
Initialise
Caution
• Do not remove the SD card while executing “Format
SD Card” or “Erase Saved BD-ROM Data (SD Card)”. It
damages the card.
INTRODUCTI
ON
CONNE
C
T
IONS
PLAY
BAC
K
FUNCTI
O
N
S
E
TUP
OT
H
E
R
S
E5RJ0BD_EN.book Page 39 Tuesday, October 20, 2009 3:53 PM