beautypg.com

Disable, 38 f, Function setup – Toshiba BDX2000 User Manual

Page 38: 38 en

background image

38

EN

FUNCTION SETUP

Connection Speed

You can set connection speed as your preference.
(The default setting is “Auto”.)

1

Follow steps 1 to 4 in “Connection Test” on
page 36.

2

Use [K / L] to select “Enable(Custom)”, then
press [ENTER].

3

Use [K / L] to select “Connection Speed”, then
press [ENTER].

4

Use [K / L] to select the desired setting, then
press [ENTER].

“Auto”:
Set the appropriate connection speed automatically, in
accordance with your network environment.

5

Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.

BD-Live Setting

You can limit the Internet access from the BD-Live
functions. (The default setting is “Allow”.)

1

Follow steps 1 to 4 in “Connection Test” on
page 36.

2

Use [K / L] to select “Enable(Custom)”, then
press [ENTER].

3

Use [K / L] to select “BD-Live Setting”, then
press [ENTER].

4

Use [K / L] to select the desired setting, then
press [ENTER].

“Allow”:
Internet access is permitted from all BD-Live contents.
“Limited Allow”:
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
“Prohibit”:
Internet access is prohibited from all BD-Live contents.

5

Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.

Deactivate all the network connection and settings.

1

Follow steps 1 to 4 in “Connection Test” on
page 36.

2

Use [K / L] to select “Disable”, then press
[ENTER].

3

Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.

“10BASE Half”

: Set the connection speed to

“10BASE Half”.

“10BASE Full”

: Set the connection speed to

“10BASE Full”.

“100BASE Half”

: Set the connection speed to

“100BASE Half”.

“100BASE Full”

: Set the connection speed to

“100BASE Full”.

Note

• Choose a connection speed in accordance with your

network environment.

• The network connection may be disabled depending

on the device, when the settings are changed.

Disable

Note

• The network connection can be reactivated by

setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.

E5RJ0BD_EN.book Page 38 Tuesday, October 20, 2009 3:53 PM