Toshiba BDX2000 - Manual (Page 28)

28 EN
FUNCTION SETUP
Category Menus / Options Description
Custom
Video TV Aspect
• Refer to page 32
for more
information.
16:9 Wide Sets the aspect ratio of the playback image to fit your
TV.
4:3 Pan & Scan
4:3 Letter Box
16:9 Squeeze
HDMI Video
Resolution*
• This feature is
available only
when the display
device is
connected by an
HDMI cable.
• Refer to page 32
for more
information.
Auto Sets the resolution of the video signal being output
from the HDMI OUT jack.
480p/576p
720p
1080i
1080p
1080p24
HDMI Deep Color
• This feature is
available only
when the display
device is
connected by an
HDMI cable, and
when it supports
Deep Colour
feature.
Auto Reduces the posterisation effect of the playback
picture.
“Auto”:
Reduces the posterisation effect by automatically
outputting up to 12 bit colour whenever the unit
recognises the connected display device supports
Deep Colour feature.
“Off”:
Outputs the standard 8 bit colour.
Off
Component
Output* 480i/576i Sets the resolution for the component output picture.
480p/576p
720p
1080i
Progressive Mode Auto “Auto”:
The progressive mode will detect 24-frame film
material (movies) and automatically select
appropriate progressive mode.
“Video”:
Suited for playing back video material discs (TV shows
or animation).
Video
Still Mode Auto Adjusts picture resolution and quality in still mode.
“Auto”:
Automatically selects the best resolution setting
(“Frame” or “Field”) based on the data characteristics
of the pictures.
“Field”:
Stabilises the pictures, although the picture quality
may become coarse due to the limited amount of
data. Select “Field” when the pictures are still unstable
even if “Auto” is selected.
“Frame”:
Displays relatively motionless pictures in higher
resolution. “Frame” improves the picture quality,
although it may unstabilise the pictures due to
alternate output of 2-field data.
• An individual picture on the TV screen is called
“Frame”, which consists of two separate images
called “Field”. Some pictures may be blurred at the
auto setting in “Still Mode” setting due to their data
characteristics.
Field
Frame
Audio BD Audio Mode Mix Audio Output For BD, selects whether to output the secondary and
interactive audio with primary audio if it is available or
only the primary audio. Refer to “Setting the BD Audio
Mode” on page 26.
“Mix Audio Output”:
The audio for the secondary video and the interactive
application will be output together with the audio for
the primary video.
“HD Audio Output”:
Outputs only the primary audio. Set this mode in order
to output Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
HD Audio Output
E5RJ0BD_EN.book Page 28 Tuesday, October 20, 2009 3:53 PM