Toshiba BDX2100 - Manual (Page 20)

0
E
ng
lis
h
• [HDMI]
Select.the.output.mode.of.HDMI.Out.
jack, options include Bitstream, PCM,
Reencode.and.Off.
{Bitstream}.–.Output.HDMI.digital.
signal.without.any.processing.
{PCM}.–.Output.HDMI.digital.signal.
with processing, only two channels
export.
{Reencode}.–.Auto.select.signal.type.
from.."COAXIAL.jack".or."HDMI.Out.
jack".according.to.the.Audio.stream.on.
disc.
{Off}.–.No.output.for.HDMI.
• [Down_samp]
Select. the. digital. audio. signal. sampling.
frequency.
{48K}.–.For.discs.recorded.at.sampling.
rate.of.48.kHz.
{96K}.–.For.discs.recorded.at.sampling................
rate.of.96.kHz..
{192K}.–.For.discs.recorded.at.sampling.
rate.of.192.kHz.
• [DRC].
Select.the.Dynamic.Range.Control.mode.
which. makes. it. available. to. listen. to. a.
movie. at. a. low. volume. without. losing.
sound.clarity.
{Off}.–.Non-dynamic.range.compress..
{On}.–.Dynamic.range.compress.
{Auto}. –. Adjust. the. DRC. according. to.
input.audio.
The.setting.of.AUTO.is.effective.for.Dolby.
TrueHD.
System Information
1. Press.SETUP
[General Setting].menu.is.displayed.
2. Press  to.select.[System
Information],
-.The.current.software.version.and.MAC.
address.display
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu.
SETUP Exit
Use cursor key to move focus,use
“OK” key ro select
Software version: BDP V3.0
MAC: 00-1C-50-17-1A-DD
... System Information ...