Toshiba BDX2100 - Manual (Page 19)

1
E
ng
lis
h
{Contrast}-..press./.to.adjust.
the contrast of display, goes left
means.low.contrast.and.right.means.
high.contrast.
{Hue}-.press./.to.adjust.the.Hue.
of display, goes left means low hue
and.right.means.high.hue.
{Saturation}-. press. /. to. adjust.
the saturation of display, goes left
means.low.Saturation.and.right.means.
high.saturation.
3..Press.RETURN.to.exit.
Brightness
Contrast
Hue
Saturation
Return Exit Change
• [Sharpness]
Select the level of sharpness: High,
Middle, Low
{High}-.Select.High.sharpness.level
{Middle}-.Select.Middle.sharpness.level
{Low}.-.Select.Low.sharpness.level
[Motion Video Process]
TV Video Mode Standard
Noise Reduction 0
Use cursor key to move focus,use
“OK” key ro select
Video Process
Motion Video... Color Adjust
... Display Setting...
SETUP Exit
• [Video Mode]
Select the output mode of video,options
include: Standard, Vivid, Cinema, Custom,
these.can.change.the.output.display.
{Standard}.output.video.signal.without.
any.processing.and.in.standard.mode.
{Vivid}.output.video.signal.in.vibrant.
color.mode.
{Cinema}.output.video.signal.in.cinema.
mode.
{Custom} you can define your own video
mode by adjusting the video Brightness,
Saturation, Hue, Contrast, Sharpness and
CTI.
• [Color Adjust]
you can define your own Color
adjustment.when.you.select.the.Custom.
video.mode.and.you.can.adjust.the.Color.
of red, green, blue, yellow, cyan and
magenta.
{Red} Define your own red Color by
adjusting the brightness, saturation and hue.
{Green}.Define your own green Color by
adjusting the brightness, saturation and hue.
{Blue}.Define your own blue Color by
adjusting the brightness, saturation and hue.
{Yellow} Define your own yellow Color
by adjusting the brightness, saturation
and.hue.
{Cyan} Define your own cyan Color by
adjusting the brightness, saturation and hue.
{Magenta}.Define your own magenta Color
by adjusting the brightness,saturation and hue.
• [Noise Reduction]
Reduces.the.noise.of.the.playback.picture.
{0}.–.Shows.the.original.picture.as.
recorded.
{1}.–.Executes.3D.noise.reduction.which.
detects.and.deletes.the.noise.by.
comparing.each.picture.frames.
{2}.–.Executes.MPEG.noise.reduction.
which.reduces.the.block.noise.and.
mosquito noise on the subtitles on the
movie.
{3}.–.Executes.both.MPEG.noise.
reduction.and.3D.noise.reduction.
Audio Setting
1. Press.SETUP
[General Setting] menu.is.displayed.
2. Press  to.select.[Audio Setting],
then.press...
3. Select an option, press  to.access.
SETUP Exit
Audio Output Spdif PCM
PCM
48K
Use cursor key to move focus,use
“OK” key ro select
HDMI
Down_samp
Off DRC
... Audio Setting...
4. Press / to.select.a.setup.option.and
press ..
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[Audio Output]
• [Spdif]
Select.the.output.mode.of.COAXIAL.
jack, options include Bitstream, PCM,
Reencode.and.Off.
{Bitstream}.–.Output.digital.signal.
without.any.processing.
{PCM}.–.Output.digital.signal.with.
processing, only two channels export.
{Reencode}.–.Auto.select.signal.type.
from.COAXIAL.jack.according.to.the.
Audio.stream.on.disc.
{Off}.–.No.output.for.S/PDIF.