Toshiba W4333 - Manual (Page 23)

23
Engl
ish
SETTING UP YOUR TV
Move — Press the GREEN button to activate the
Move feature. Press B / b to select the channel
you wish to move and press OK to check.
If you wish to move multiple channels at once,
select another channel and check in the same
way. Repeat as necessary.
Once all desired channels have been checked,
press
B
/
b
to place the focus at the position to
which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Position No. Sort — Press the YELLOW
button. A confirmation window will appear. Press
C
/
c
to select Yes and press OK.
If the Standby Channel Update is set to On, when the TV
is in Standby, Digital Tuning is automatically executed.
a
Select DTV Settings from the Installation menu
and press OK.
b
Press b to select Standby Channel Update and
press
c
and
B
/
b
to select On.
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
using the television for displaying in a shop, etc.
a
Select Location from the Installation menu.
b
Press
C
/
c
to select Home or Store.
This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new digital
services.
This ‘switch-off’ will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is re-
tuned to ensure that existing and new digital services can
be viewed without disruption.
Standby Channel Update
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Channels
Line No. 1/10
Pos. Name
Antenna TV
Your existing channel order will be lost. Do you wish to
continue?
Yes
Location setting
Analogue switch-off