Toshiba W4333 - Manual (Page 19)

19
Engl
ish
SETTING UP YOUR TV
NOTE: As new services are broadcast, it will be necessary
to re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and
can be used to update the channel list. It is
recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current
channels and settings, i.e. locked channels, will be lost.
a
Press and
B
/
b
to highlight Installation
icon.
b
Press c and B / b to select Channel Tuning and
press OK.
c
Press B / b to select Auto Tuning and press OK.
A message will appear, and then press
C
/
c
to
select Yes and press OK.
d
Press
c
and
B
/
b
to select DTV, DTV and ATV,
or ATV, if available, then highlight Start Scan and
press OK to continue with the Auto Tuning.
NOTE: If you have selected Others for the
Country field in the Installation menu, and
selected a tuning mode other than DTV, choose
the optimum ATV broadcasting system (B/G, I, D/
K or L).
The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning
screen will display the services found.
e
Press B / b to move through the list to select a
channel and press OK to view.
ATV Manual Tuning
The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the feature
if the television cannot be connected to a media recorder/
decoder with a SCART lead or when you want to tune-in a
station on another System.
Use
C
/
c
to move across the screen and select any of the
ATV Manual Tuning options. Then use
B
/
b
to adjust the
settings.
1 Position
The number to be pressed on the remote control to
tune the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
4 Skip
Set Skip to On (
8
) or Off (
(
) for the selected
channel. See page 21.
5 Signal Class
The channel classification.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced.
See page 80.
9 Station
Station identification. Use the
Bb
and
C c
buttons to
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
Auto Tuning
Ant/Cable
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
< Channel Tuning
DTV
DTV and ATV
ATV
Auto Tuning - Antenna
Tuning Mode DTV
Start Scan
Tuning
I A 1 C 2 0 C V R
1 2 3 4 6 5 7 8 9
ATV Manual Tuning
System