Toshiba BDX2300 - Manual (Page 16)

16
English
UPG_ALL, and copy the upgrade file into this
folder.
SW upgrade by Internet introduction
There are two modes to upgrade via
internet: Automatic Mode and Interactive
Mode.
Automatic Mode:
The player will check the internet whether it
is connected automatically when powered on.
If connected, player will try to connect the
Toshiba server to check if there is new
firmware for the player.
If yes, the player will pop up a message on
the screen to inform you that an upgrading
firmware is available on the internet. You can
choose whether to upgrade or not.
Upgrade
New software found! Upgrade?
Cancel OK Start
Interactive Mode:
You can also do Internet upgrade via setup
menu.
You should make sure that the player is
connected to the internet first.
Press SETUP button of the remote control,
then choose "System -> Upgrade ->
Internet" and press OK button. Then the
player will connect the Toshiba server to
check if there is new firmware for the player.
Upgrade
Connecting to the server. Please wait!
If yes, the player will pop up a message on
the screen and you can choose whether to
upgrade or not.
Upgrade
New software found! Upgrade?
Cancel OK Start
If no, the player will pop up a message on
the screen to inform you that there is no new
firmware for the player.
Upgrade
Cancel
Current version is latest. Update is not
available.
Remark :
If you choose to upgrade the new FW ,
1.The player will begin to download the
upgrade file and pop up a message to show
the progress.
Upgrade
Cancel
Downloading upgrade file.Please wait!
2. When download is finished, the player will
pop up a message for you, and you can choose
whether to proceed with the upgrading or not.
If you choose to upgrade, the player will begin
to upgrade, and pop up a message to show the
progress. When upgrade is done, the player
will restart.
Attention! Do NOT cut off the power supply
when the firmware is upgrading! If not, the
player might become unworkable.
• [External Memory]
External Memory would be used in BD-
Live TM function. When you plug in the
USB flash drive which has at least 1GB
free space to play BD-Live TM function,
the Blu-ray Disc TM system would make a
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
2. Follow the instruction on the TV
screen to select {Information}.
System Screen Save Off
On
On
On
More...
Language Disc Auto Playback
Playback CEC
Security Disc Auto Upgrade
Network Load Default
General Setting
RETURN Return
Information
Free size is : 0MB
Move cursor key to select menu option
then use “OK ” key to select
Erase
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
• [Power Down Mode]
Quick Start can reduce the time of Power
On or Power Off significantly. But the
power consumption is higher in Quick Start
mode.
Setting methods:
Setup Menu -> General Setting -> System
-> Power Down Mode -> Normal/Quick
Start (Default as Normal).
Choose Quick Start to go into Quick Start
mode. This mode will only be activated
upon your next standby Off/On.
Generally, in Normal mode, Power On or
Power Off takes longer time and its
standby power consumption is low. In
Quick Start mode, Power On or Power Off
BDX2300KE full manual_3-6.indd 16 2012-10-25 9:38:42