beautypg.com

4preparation – Toshiba BDX2300 User Manual

Page 10

background image

10

English

4

Preparation

Always follow the instructions in this chapter

in sequence.

Note:

- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.

Prepare the remote control

1. Open the battery compartment.

2. Insert one R03 battery with correct

polarity (+/-) as indicated.

3. Close the battery compartment.

Notes:

- If you are not going to use the remote control
for a long time, remove the battery.
- Risk of explosion! Keep battery away from
heat, sunshine or fire. Never discard battery in
fire.

• The maximum operable ranges from

the unit are as follows.

- Line of sight: approx. 10 m

- Either side of the centre: approx. 7 m

within 30°

- Above: approx. 7 m within 30°

- Below: approx. 7 m within 30°

7 m 10 m

7 m

Setting up the player

Find the correct viewing input

1. Press

1

to turn on this product.

2. Turn on the TV and switch to the correct

video-in input (refer to the TV user manual

on how to select the correct input).

Initial Setting

When you turn on this unit for the first time,

you need to follow these steps.

1. A welcome page will be displayed when

this product is powered on.

2. Press OK to enter language setting.

3. Select your desired language,

resolution and aspect ratio using /, then

press OK.

4. Press SETUP to exit the Setup menu.

Use the SETUP menu

1. Press SETUP to display the Setup menu

when the Blu-ray Disc

TM

Player is playing or

no disc. And press SETUP to exit the Setup

menu.

Tip:

- When playing high-definition sources

, you must press

STOP 

button to enter

SETUP

interface.

Select menu display language

1. Press SETUP, [General Setting] menu

is displayed.

2. Select [Language], then press .

3. Select [OSD], then press .

- The language options may vary for

different regions.

4. Press /

to select a language, then

press OK.

Note:

- If this disc player is connected to a HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.

BDX2300KE full manual_3-6.indd 10

2012-10-25 9:38:38