Toshiba BDX2300 - Manual (Page 14)

14
English
Blu-ray Disc TM BONUSVIEW TM
Playing Secondary Video (Picture-in-Picture)
and Secondary Audio is for Blu-ray Disc TM
only. Secondary video can be played from a
disc compatible with the Picture-in-Picture
(PIP) function. For the playback method, refer
to the instructions for the disc.
1. Turn on secondary video by pressing the
PIP button.
2. Press the PIP AUDIO button to select the
secondary audio, and select an option except
Off. The secondary audio is opened, you can
hear the disc secondary video sound.
In order to hear the secondary audio, the PIP
feature on the disc must be turned on.
3. Press the PIP button again to turn off the
secondary video.
Primary video
Secondary video
with Secondary Audio
This function is not available when the
primary video is played in Search, Slow-
Motion, or Frame-by-Frame or Fast Forward/
Reverse mode.
To listen to the secondary audio, the digital
audio output must be set to "Bitstream",
"Re-encode" or "PCM". Otherwise, only the
primary audio can be heard.
Notes:
- Not all the Blu-ray™ discs can support this
function.
- High Definition PIP (Second Video) is not
supported.
Watermark
This product uses Cinavia technology to limit
the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message
will be displayed and playback will be
interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.
com. To request additional information about
Cinavia by mail, send a postcard with your
mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA
6 Customizing
This section describes the various setting
option of this Blu-ray Disc TM player.
If the setup option is greyed out, it means
the setting cannot be changed at the
current state.
General Setting
1. Press SETUP button on the remote
control. The Setup Menu appears.
System Screen Saver On
On
On
More...
More...
Language Disc Auto Playback
Playback CEC
Security Load Default
Network Upgrade
General Setting
SETUP Exit
Move cursor key to select menu option
then use “OK” key to select
2. Press  to select an option, then press
 to access.
3. Press / to select a setup option and
press .
4. Select the setting you wish to change
and press OK to confirm.
- Press  to return to the previous menu.
[System]
To change the following system option to
personalize your Blu-ray Disc TM player .
• [Screen Saver]
Turn On or Off the screen saver mode.
It helps to protect the TV screen.
{ On } – Set the screen saver active
after approximately 5 minutes with no
operation. You can turn off the screen
saver by pressing the SETUP button.
- The Blu-ray Disc TM player will switch to
standby mode if there is no operation
after the screen saver is engaged for
approximately 10 minutes.
{ Off } – Turn off the screen saver
mode. The Blu-ray Disc TM player will not
switch to standby mode automatically.
• [Disc Auto Playback]
Turn On or Off the disc automatic
playback switching mode.
{On} – The disc playback automatically
after loading.
{Off} – Turn off disc auto playback
mode.
• [CEC]
This player supports REGZA-LINK which
uses the HDMI CEC (Consumer
Electronics Control) protocol. You can
use one single remote control to control
BDX2300KE full manual_3-6.indd 14 2012-10-25 9:38:39